Bugs Getting Inside
Insects finding their way in through holes, loose edges or gaps around the frame.
Fresh Air, No Insects
Window Screen Replacement Done With Care
Torn, sagging or bent window screens let bugs in and make a house look tired. We replace the mesh, check the frame and return screens that fit snugly and look sharp.
Free quotes
Satisfaction guarantee
Southwest Florida
Window Screen Replacement at a glance
Window screen replacement means removing worn or damaged mesh from a window screen frame and installing new screen with fresh spline, or repairing the frame itself when it is bent or loose. Re-Screening Pro handles window screen replacement for homes in Sarasota, Bradenton and across Southwest Florida. Start with a free quote by filling out the form on this page.
- WhoRe-Screening Pro, residential screen repair and rescreening
- WhereNaples to Bradenton, including Lee and Sarasota counties
- How to startRequest a free quote online
Window Screen Replacement
Window Screen Replacement
Why Window Screens Fail Before You Expect Them To
Window screens sit in direct sun year-round, and Florida UV and humidity gradually make the mesh brittle. Once it loses flexibility, a bump from a ladder, a curious cat or a storm-tossed branch is enough to tear it.
The frame matters just as much. Thin window screen frames bend easily when they are removed for cleaning or pushed out in a storm, and a bent frame never sits flat in the window again, leaving gaps insects can find.
See the difference
What a repaired screen changes
Drag the slider to compare a worn, torn enclosure with the same space after window screen replacement.
- Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
- Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
- A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Assessment, plan, then the work
Re-Screening Pro
What Goes Into a Proper Window Screen Replacement
Good window screen replacement starts with the frame. We check that corners are tight and sides are straight before new mesh goes on, because rescreening a warped frame only locks the problem in.
Mesh is then laid across the frame and rolled into the channel with new spline, working evenly so the screen is taut without pulling the frame out of square. Excess is trimmed close to the spline for a clean edge that looks finished from inside and out.
- Frame straightness and corner condition checked first
- Mesh choice matched to the window and your needs
- Even tension so the frame stays square
- New spline seated fully in the channel
- Clean trimmed edges and a proper fit back in the opening
What we look for
Signs Your Window Screens Need Replacing
Tears and Holes
Visible rips or punctures in the mesh, even small ones that keep growing.
Brittle, Faded Mesh
Screen that looks chalky or cracks when pressed lightly is past its useful life.
Bent Frames
Frames that bow or no longer sit flat in the window opening.
Spline Pulling Loose
The rubber spline lifting out of the channel and letting the mesh go slack.
Cloudy View
Dirty, stretched or damaged mesh that makes the view outside look dull.
Why Re-Screening Pro
What You Get With Re-Screening Pro
Every job starts with an honest look at your screens and a clear plan before any work begins.
Request My Free Quote- Screens that fit snugly with no gaps for insects
- Taut, even mesh with clean edges
- Frame condition checked on every screen
- Mesh options discussed for each window
- High-quality materials and professional workmanship
- A customer satisfaction guarantee on the work
Good to know
Choosing the Right Mesh for Your Windows
Standard fiberglass mesh is a common choice for most windows. Homes near water or wooded areas sometimes benefit from finer no-see-um mesh, and windows that pets like to lean on may call for heavier pet-resistant screen.
If glare or privacy is a concern, solar-style screens are another option. We can discuss what makes sense for each window during the assessment rather than putting the same product everywhere.
Why it is worth fixing early
Small tear, bigger problem
Screen damage rarely stays the same size. Here is how a little tear usually grows.
- 01
A small tear
A pinhole, a popped spline or a snag from a branch or pet claw.
- 02
Wind works it open
Every breeze and summer storm pulls on the loose edge.
- 03
The panel lets go
The tear runs, the mesh sags and the panel starts to flap.
- 04
Bugs and debris get in
Now insects, leaves and fronds come right through.
Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.
Our process
Our Window Screen Process
From the first look to the finished screen, you know what is happening and why.
Inspect Every Screen
We look at the mesh, spline and frame on each window to see what needs attention.
Recommend a Plan
You hear which screens need new mesh, which frames need work and which can be left alone.
Rescreen and Repair
Frames are straightened or repaired as needed, then fitted with new mesh and spline.
Refit and Review
Screens go back into the windows, and we confirm each one sits snugly before we leave.
Related services
More screen services from Re-Screening Pro
One team for every screened space at your home, from the pool cage to the front door.
Service area
Serving Southwest Florida
We replace window screens for homeowners in Sarasota, Bradenton and Venice, along with other communities in Southwest Florida.
- Bonita Springs
- Bradenton
- Estero
- Fort Myers
- Immokalee
- Lee County
- Marco Island
- Miramar
- Naples
- North Port
- Punta Gorda
- Sarasota
- Sarasota County
- Venice
Questions
Window Screen Replacement FAQ
Is it worth replacing a single window screen?
Yes. Whether it is a single torn screen or every window in the house, we can work on as many as you need. Many homeowners start with the worst ones and add others once they see the difference.
Is it better to rescreen or replace the whole frame?
If the frame is straight and the corners are solid, new mesh and spline are usually all that is needed. If the frame is badly bent or damaged, frame repair or replacement may be the better option, and we will explain which applies after the inspection.
What causes window screens to sag?
Sagging usually comes from spline that has dried out or pulled loose, mesh that has stretched with age, or a frame that has bent. Fixing only the mesh without addressing the cause tends to bring the sag right back.
Can I get finer mesh to keep out tiny insects?
Finer no-see-um mesh is a common choice for keeping out very small insects. It can be discussed during the assessment along with other options like pet-resistant or solar-style screen.
How do I schedule window screen replacement?
Fill out the quote form on this page with a few details about your windows. The quote is free, and we will reach out to arrange an assessment.
Free quote
Ready for Window Screens That Fit Right?
Use the form to request your free window screen replacement quote. We will take a look and give you a clear plan.
- Tell us about your screensA short form: a few details and a way to reach you.
- We set up an assessmentWe look at the damage in person and explain the plan.
- You decideNo obligation. Your quote is free.
Ready when you are
Window screen replacement with tight mesh, fresh spline and true frames for Sarasota and Bradenton homes. Request a free quote from Re-Screening Pro today.