Pool Cage Specialists

Pool Cages Screen Repair With Lasting Results

A pool cage is a large, exposed structure with dozens of panels. We repair it methodically so the fixes hold and the cage looks consistent.

Free quotes Satisfaction guarantee Southwest Florida

Pool Cages Screen Repair at a glance

Pool cages screen repair restores the mesh panels on the aluminum cage over a pool, including roof panels, wall panels and doors, and addresses the spline and fasteners that hold them. Re-Screening Pro provides pool cages screen repair in Sarasota, Bradenton and throughout Southwest Florida, from a single torn panel to a full rescreen. Request a free quote with the form on this page.

  • WhoRe-Screening Pro, residential screen repair and rescreening
  • WhereNaples to Bradenton, including Lee and Sarasota counties
  • How to startRequest a free quote online
Long pool deck with palm trees and open sky
Pool Cages Screen Repair

Pool Cages Screen Repair

Roof Panels and Wall Panels Fail Differently

On a pool cage, the roof panels take the most direct sun and catch falling palm fronds, branches and storm debris. They tend to degrade and tear first, and the damage is often hard to see from the ground.

Wall panels usually suffer more from contact, such as pets, pool toys, furniture and lawn equipment. A good pool cages screen repair accounts for both, because the best fix for a sun-rotted roof panel is not always the same as for a punctured wall panel.

See the difference

What a repaired screen changes

Drag the slider to compare a worn, torn enclosure with the same space after pool cages screen repair.

  • Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
  • Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
  • A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Backyard pool surrounded by a sun deck and greenery
Assessment, plan, then the work

Re-Screening Pro

The Method Behind a Durable Repair

We begin with a full walk around and under the cage, noting torn panels, loose mesh, failing spline and any loose or corroded screws. That gives us a complete picture before recommending anything.

Repairs are then done with the long run in mind. Damaged mesh is removed, channels are cleaned, new screen is laid in with consistent tension and new spline is rolled in firmly. Edges are trimmed clean, and debris is cleared from the deck and pool area.

  • Inspection of roof panels, wall panels and doors
  • Spline channels cleaned before new mesh goes in
  • Consistent tension so panels sit flat
  • Loose or corroded fasteners noted and addressed
  • Deck and pool area cleaned after the work

What we look for

Signs Your Pool Cage Needs Repair

01

Torn Roof Panels

Openings overhead that let leaves, debris and insects fall into the pool.

02

Frond and Branch Damage

Punctures from palm fronds and limbs landing on the cage.

03

After a Storm

Blown-out or loosened panels following high winds.

04

Flapping Screens

Loose panels that move and make noise in the wind.

05

Debris in the Pool

More cleaning than usual because the cage is no longer keeping debris out.

06

Loose Hardware

Screws and fasteners that have worked loose or corroded.

Why Re-Screening Pro

Benefits of a Well-Repaired Pool Cage

Every job starts with an honest look at your screens and a clear plan before any work begins.

Request My Free Quote
  • Cleaner pool water with less debris
  • Fewer insects around the pool
  • Panels that hold up better in wind
  • Hardware issues caught before they spread
  • A more consistent look across the cage
  • Longer life for the enclosure

Good to know

Repair a Few Panels or Rescreen the Cage?

If most of the cage is still in good condition, replacing only the damaged panels is efficient and cost-conscious. If tears keep appearing in different places, the mesh is likely near the end of its life and a full rescreen will usually serve you better.

We explain what we see and why, so you can decide between targeted repairs and a full rescreen with a clear understanding of each.

Why it is worth fixing early

Small tear, bigger problem

Screen damage rarely stays the same size. Here is how a little tear usually grows.

  1. 01

    A small tear

    A pinhole, a popped spline or a snag from a branch or pet claw.

  2. 02

    Wind works it open

    Every breeze and summer storm pulls on the loose edge.

  3. 03

    The panel lets go

    The tear runs, the mesh sags and the panel starts to flap.

  4. 04

    Bugs and debris get in

    Now insects, leaves and fronds come right through.

Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.

Our process

How We Repair Pool Cages

From the first look to the finished screen, you know what is happening and why.

  1. Full Cage Inspection

    We check every roof panel, wall panel and door, along with spline and fasteners.

  2. Repair Plan

    You get a clear explanation of targeted repairs versus a full rescreen and the mesh options available.

  3. Rescreen Damaged Panels

    Old mesh comes out, channels are cleaned, and new screen is tensioned and splined in place.

  4. Cleanup and Walkthrough

    We clear debris from the deck and pool area and review the finished cage with you.

Related services

More screen services from Re-Screening Pro

One team for every screened space at your home, from the pool cage to the front door.

Service area

Serving Southwest Florida

We repair pool cage screens for homeowners in Sarasota, Bradenton and Fort Myers, along with other parts of Southwest Florida.

  • Bonita Springs
  • Bradenton
  • Estero
  • Fort Myers
  • Immokalee
  • Lee County
  • Marco Island
  • Miramar
  • Naples
  • North Port
  • Punta Gorda
  • Sarasota
  • Sarasota County
  • Venice

Questions

Pool Cages Screen Repair FAQ

Can you repair the roof panels on my pool cage?

Yes. Roof panels are a common part of pool cage work because they take the most sun and debris. We inspect them during the assessment even if the damage is not visible from the ground.

How do I know if my cage needs a full rescreen?

If tears keep showing up in new places, or the mesh is brittle and faded across much of the cage, a full rescreen usually makes more sense than repeated repairs. We will explain what we find so you can decide.

What should I do after a storm damages my pool cage?

Once it is safe, take photos of the damage and keep people and pets away from loose panels or debris. Then request a quote, and we will assess the cage and recommend a repair plan.

Are there different screen options for pool cages?

Yes. Common options include standard fiberglass, finer no-see-um mesh and heavier screen types. We can discuss which suits your cage during the assessment.

How do I request a pool cage repair quote?

Fill out the quote form on this page with a few details about your cage. Quotes are free, and we will reach out to schedule an inspection.

Free quote

Restore Your Pool Cage

Request your free pool cages screen repair quote through the form, and we will inspect the whole cage before recommending a plan.

  • Tell us about your screensA short form: a few details and a way to reach you.
  • We set up an assessmentWe look at the damage in person and explain the plan.
  • You decideNo obligation. Your quote is free.

Ready when you are

Pool cages screen repair in Sarasota and Bradenton, covering roof panels, wall panels and spline work. Request a free quote from Re-Screening Pro today.

Get My Free Quote
Re-Screening Pro

Pool cage, lanai, patio, window and door screen repair and replacement across Southwest Florida.

Free Quote

Areas we serve

  • Bonita Springs, FL
  • Bradenton, FL
  • Estero, FL
  • Fort Myers, FL
  • Immokalee, FL
  • Lee County, FL
  • Marco Island, FL
  • Miramar, FL
  • Naples, FL
  • and more