Storm Damage
Panels torn or blown out by high winds and flying debris.
Enclosures Built to Last
Pool Enclosure Screen Repair That Holds Up
Your pool enclosure takes sun, wind and rain every day. We repair it with the tension, spline work and frame checks that keep panels tight season after season.
Free quotes
Satisfaction guarantee
Southwest Florida
Pool Enclosure Screen Repair at a glance
Pool enclosure screen repair restores torn, sagging or loose screen panels on the screened structure surrounding a pool, along with the spline and fasteners that hold them in place. Re-Screening Pro provides pool enclosure screen repair in Venice, North Port and throughout Sarasota County. The process begins with an on-site assessment, and you can request a free quote through the form on this page.
- WhoRe-Screening Pro, residential screen repair and rescreening
- WhereNaples to Bradenton, including Lee and Sarasota counties
- How to startRequest a free quote online
Pool Enclosure Screen Repair
Pool Enclosure Screen Repair
Repair the Cause, Not Just the Hole
A torn panel is the symptom people notice, but the cause is often somewhere else. Spline that has shrunk and hardened, screws that have loosened or corroded, or a frame member that has shifted can all leave mesh vulnerable to the next gust of wind.
Our pool enclosure screen repair always includes a look at the surrounding structure. If something in the frame or hardware is contributing to the damage, we point it out so the repair actually lasts.
See the difference
What a repaired screen changes
Drag the slider to compare a worn, torn enclosure with the same space after pool enclosure screen repair.
- Bugs stay outsideTight mesh with no gaps means mosquitoes and no-see-ums bounce off instead of drifting in.
- Less in the poolLeaves, fronds and debris stay out of the water and off the deck.
- A clear view againNew screen looks crisp and even instead of faded, rippled and patched.
BeforeAfter
Assessment, plan, then the work
Re-Screening Pro
Patch, Panel or Full Rescreen
Pool enclosures are made up of many individual panels, which gives you flexibility. Isolated damage in healthy mesh can be handled with a targeted repair, while a panel with a large tear or worn-out mesh is better replaced completely.
When a large share of the panels show fading, brittleness or repeated tears, a full rescreen usually costs less in the long run than chasing one panel at a time. We lay out the options plainly so you can choose what makes sense for your home and budget.
- Targeted repair for small, isolated damage
- Single-panel replacement for torn or stretched sections
- Multi-panel replacement for clustered wear, such as the sunniest side
- Full enclosure rescreen when wear is widespread
What we look for
Problems We Fix on Pool Enclosures
Palm Frond Tears
Punctures and rips from falling fronds and branches on the roof panels.
Billowing Panels
Loose mesh that balloons and snaps in the wind instead of staying flat.
Failing Spline
Dried, shrunken spline letting mesh pull out of the frame channels.
Sun-Worn Mesh
Brittle, discolored screen on the sides that get the most sun.
Insects and Debris Inside
Leaves, bugs and debris getting into the pool through gaps and holes.
Why Re-Screening Pro
Benefits of a Properly Repaired Enclosure
Every job starts with an honest look at your screens and a clear plan before any work begins.
Request My Free Quote- Less debris and fewer insects in the pool
- Tight, even panels that handle wind better
- Hardware and frame issues caught early
- A cleaner, more uniform look from the yard and street
- Longer life for the enclosure as a whole
- Work backed by a customer satisfaction guarantee
Good to know
The Finishing Details That Matter
On a pool enclosure, uneven tension stands out. Panels that are too loose ripple in the wind, and panels that are overtightened can strain the spline and frame. We work for consistent tension across each section so the enclosure looks uniform.
Fresh spline is rolled fully into the channel, edges are trimmed clean, and old mesh and scraps are cleared from the deck and pool area before we leave.
Why it is worth fixing early
Small tear, bigger problem
Screen damage rarely stays the same size. Here is how a little tear usually grows.
- 01
A small tear
A pinhole, a popped spline or a snag from a branch or pet claw.
- 02
Wind works it open
Every breeze and summer storm pulls on the loose edge.
- 03
The panel lets go
The tear runs, the mesh sags and the panel starts to flap.
- 04
Bugs and debris get in
Now insects, leaves and fronds come right through.
Catching damage early often means a simpler fix, like one panel or a strip of spline, instead of a whole wall.
Our process
How We Repair Pool Enclosures
From the first look to the finished screen, you know what is happening and why.
Walk the Enclosure
We inspect every panel, along with the spline, fasteners and frame, and note what needs attention.
Explain the Options
You get a clear plan covering repair, panel replacement or a full rescreen, along with mesh choices.
Repair and Rescreen
Damaged mesh comes out, frames and hardware are addressed, and new screen is tensioned and splined in.
Clean Up and Review
We clear debris from the deck and pool area and walk through the finished work with you.
Related services
More screen services from Re-Screening Pro
One team for every screened space at your home, from the pool cage to the front door.
Service area
Serving Southwest Florida
Re-Screening Pro repairs pool enclosure screens for homeowners in Venice, North Port and Sarasota, as well as other parts of Southwest Florida.
- Bonita Springs
- Bradenton
- Estero
- Fort Myers
- Immokalee
- Lee County
- Marco Island
- Miramar
- Naples
- North Port
- Punta Gorda
- Sarasota
- Sarasota County
- Venice
Questions
Pool Enclosure Screen Repair FAQ
Can you replace just the torn panels on my enclosure?
Yes. Individual panels can be replaced without redoing the whole enclosure. We will tell you honestly if the surrounding mesh is worn enough that a larger rescreen would make more sense.
Will new panels match the old ones?
New mesh is usually darker and cleaner than screen that has been in the sun for years, so some contrast is normal. If appearance matters, replacing a full wall or section at once can give a more uniform look.
Why does my enclosure keep tearing in the same spots?
Repeated tears often point to an underlying issue such as loose fasteners, a shifted frame member, failing spline or a branch that rubs the screen. Finding and fixing that cause is part of a lasting repair.
What screen options are available for pool enclosures?
Common choices include standard fiberglass, finer no-see-um mesh and heavier, more durable screen types. Options can be discussed during the assessment based on your enclosure and how you use it.
How do I book an assessment for pool enclosure screen repair?
Use the quote form on this page to tell us about your enclosure. Quotes are free, and we will set up a time to assess it in person.
Free quote
Get Your Pool Enclosure Back in Shape
Request a free pool enclosure screen repair quote using the form, and we will arrange an on-site assessment.
- Tell us about your screensA short form: a few details and a way to reach you.
- We set up an assessmentWe look at the damage in person and explain the plan.
- You decideNo obligation. Your quote is free.
Ready when you are
Pool enclosure screen repair in Venice, North Port and Sarasota County, from one torn panel to a full rescreen. Get a free quote from Re-Screening Pro.